Conversion to UF

Chemical conversion to an ultrafiltration membrane and then reuse

Compatible with plastic components	Yes
Compatible with fibreglass components	Yes
Available in Australia	Yes
Available globally	Yes
Manual disassembly required	No

Given the nature of the composite construction used in RO production, relatively simple conversion from an RO to ultrafiltration (UF) membrane is possible. The structure of an RO membrane can be seen in the image below, and flat sheet UF membranes have an extremely similar construction, but are just missing the top polyamide layer. By chemically degrading the polyamide active layer with sodium hypochlorite (NaClO), the polysulfone layer is exposed, resulting in a membrane with properties extremely similar to commercially available UF membranes.

Cross section structure of an RO membrane.

The method for chemical conversion of RO membranes has been optimised, with controlled exposure to 300,000 ppm.hr of NaOCl resulting in organic and virus removal properties, and hydraulic performance, comparable to commercially available 10 – 30 kDa molecular weight cut off UF membranes. Potential applications for the converted RO membranes include use in pre-treatment filtration in desalination plant, waste water treatment or for low cost water treatment in developing areas.

This promising end-of-life application how now been extensively validated, and is ready for a trial application. If you require a series of extremely low cost, environmentally friendly, spiral wound UF membranes, please contact Pierre Le-Clech (p.le-clech@unsw.edu.au) for further information.

References

</div>