Difference between revisions of "Perth Seawater Desalination Plant - Pretreatment"

From Desal Wiki
Line 26: Line 26:
 
===General Description===
 
===General Description===
 
Feedwater is first dosed with ferric chloride following filtration in a system consisting of 24 horizontal pressure filters, each having a surface area of 52 m2 and a 1.15 m deep filter bed of dual media. To protect the reverse osmosis membranes against physical fouling by suspended solids, filtered seawater is then passed through an array of 5-micron cartridge filters. Filter backwash water is treated using a high rate Densadeg gravity thickener and the sludge is dewatered for land disposal.
 
Feedwater is first dosed with ferric chloride following filtration in a system consisting of 24 horizontal pressure filters, each having a surface area of 52 m2 and a 1.15 m deep filter bed of dual media. To protect the reverse osmosis membranes against physical fouling by suspended solids, filtered seawater is then passed through an array of 5-micron cartridge filters. Filter backwash water is treated using a high rate Densadeg gravity thickener and the sludge is dewatered for land disposal.
 +
 +
[[Category:Hypochlorite]]
 +
[[Category:SMBS]]
 +
[[Category:Ferric & Ferrous Iron]]
 +
[[Category:Sand Filtration]]
 +
[[Category:Cartridge Filters]]
 +
[[Category:Acidification]]

Revision as of 07:36, 27 June 2014

Pretreatment Configuration
Cartridge Filters
Pore Size: 5 micron
Acidification
Type: Sulphuric Acid

General Description

Feedwater is first dosed with ferric chloride following filtration in a system consisting of 24 horizontal pressure filters, each having a surface area of 52 m2 and a 1.15 m deep filter bed of dual media. To protect the reverse osmosis membranes against physical fouling by suspended solids, filtered seawater is then passed through an array of 5-micron cartridge filters. Filter backwash water is treated using a high rate Densadeg gravity thickener and the sludge is dewatered for land disposal.